M-Stage Scaffolding

MALMO STEELS M-Stage is a versatile scaffold system which can be used for all forms of access and support structures in the building and construction industries, shipbuilding, offshore construction and industrial maintenance.

M-Stage provides major savings in erection and dismantling times thus minimizing on-site costs. When not in use, its modular construction ensures minimal space requirements for storage.

International Standards

MALMO STEELS M-Stage products is usually primed and painted for maintenance free use. However the product could be galvanized, powder coated or electroplated based on our customer’s needs.

MALMO STEELS M-Stage confirms to BS1139 Part 5, HD1000, International Standards.

Modular

MALMO STEELS M-Stage is a modular system scaffold with wedge fixing for all access scaffold requirements. The wedge fixing of the ledgers and transoms gives a simple and fast means of erecting access scaffolding without loose parts. Rigid four ways fixing giving a positive location without movement. Spigot and wedge fixed on the standard to give guaranteed vertical alignment.

K-Stage Access Scaffold Components

Hop Up Bracket

To extend the scaffold by cantilevering for an additional 1, 2 or 3 board platform.

M-Stage Access Scaffold

M-STAGE is a modular system scaffold with wedge fixing for all access scaffold requirements.
The wedge fixing of the ledgers and transoms gives a simple and fast means of erecting access scaffolding without loose parts.
Rigid 4 way fixing gives a positive location without movement.
Spigot and wedge fitting on the standard to give guaranteed vertical alignment.
Quality primed & painted or hot dipped galvanised finish for maintenance free use.
Conforms to BS1139 Part 5, HD 1000, OSHA, Australian, New Zealand Standards.

Toe Board Bracket

Clamps to the standard with a captive wedge to hold the batten toe board vertically in place.

Tie Bar

For connecting the access brackets along the length of the platform. This ensures correct spacing so that the battens are not dislodged.

End Toe Board Bracket

Fits into 'V' locating lugs on the standard at the end of a platform to hold the end batten toe board vertically in place.

Batten

The steel platform batten spans between the transoms giving a non-slip level surface.

Batten Clamp

To secure battens in high wind conditions.

Bridging Ledger 16'0"

Made from standard tube to span between two 8' bays to give clear access or to avoid obstructions.

Internal Corner Filler

For use with two and three board stage bracket, to fill the gap at internal corners.

Bridging Ledger 24'0"

Made from standard tube to span between three 8' bays to give clear access or to avoid obstructions.

Return Transom

Fixed to the inner and outer standard and placed over the first ledger of an adjacent 90° bay. Seating on one side for 3 or 5 numbers of steel or timber battens giving the same level decking on both scaffold runs.

Coupler Brace

The coupler brace is used when necessary across the scaffold.

Diagonal Brace

The diagonal brace is used to the full height of the scaffolding in a longitudinal direction.

Stage Bracket

To extend the scaffold by cantilevering for an additional 1,2 or 3 board platform.

Standards

The standard is the vertical member of the scaffold with a spigot (either round or box type) at one end for accurate alignment.

A series of 'V' locating lugs are welded on the tube for the attachment of ledgers, transoms, and auxiliary components.

Open ended standards and loose spigots are also available.

Ledgers

The ledger is used to connect the standard in a longitudinal direction. It is made from scaffold tube with wedge 'Banana Type' fixing at each end which fits in the 'V' locating lugs on the standard. The ledger is also used as a guardrail.

Transom

Transom is either made of back-to-back anglev or T-shaped profile with the same fixing device on each end as the ledger. They are used to carry 3 or 5 numbers of steel or trimber battens and toeboard.