Have any question?
The general purpose wall support combining high performance with simple, rapid assembly, great versatility and major cost advantages. The Steel wall form work provides maximum benefits when used with heavy duty ties and steel walings. The highlights of our wall formwork system is as follows
Strong movements of Resistance 25.5 KNM.
The right length for the job. (Four metric sizes catering for all common formwork heights.)
Tall forms with fewer ties. ( End to end joining of soldier with the joint plate reduces ties to the minimum)
Economic use of wailings (Timber or steel wailings can be used at optimum spacing. There are no pre-set fixing positions)
Specially designed for used with KG Aluminium Beams (Most advance formwork system but with big savings in Ties)
Crane Handling (Complete forms can be handled by crane and lifted clear without dismantling tiles)
Precise leveling and plumbing (Integral Jacks bring the form level and to plumb without welding or packing )
Safe access (Access brackets and Handdail Post provides safe working platform, whatever the hight).
Flexible tie spacing (Ties can be position at any height so that efficient position can be used.
The General Purpose wall support system combining high performance with simple, rapid assembly. Great versatility and major cost advantages.
The steel soldier system provides maximum benefits when used with heavy duty ties and steel walings or aluminium beams.
Designed to be used in conjunction with standard soldiers, they simplify the construction of corners. By allowing ties to pass through in both direction, each corner soldier replace two standard soldiers. They permit the tie to be closer to the corner which in turn reduce the loading on external corner.
The required length of waling can obtained by joining
the waling together using two M16x35mm bolts & nuts
through the holes in end plates.
Waling of different length (1.2m, 2.7m, 3.6m etc.) are
Depth 'A" are available in 100mm, 125mm, 150mm.
It is used to fasten the steel waling to the face of
the soldier at any height using one M16x75mm
bolt and nut.
The shutter at the corner of the walls are fixed using:
It is used to support the shutter at the corner as shown in the fig..Two corner profile of different shutter are tied together using tie bar & wing nut. The aluminium beam are fitted to the profile using universal clamp.
The corner profile consist of a right angled bend sheet with holes at specified intervals. It is assembled as shown in fig..
It is used to support the shutter from the inside face
of the wall corner. It consist of an right angle bend
sheet two square tube & required number of
thread rod & wing nut. While assembling the
plywood of the shutter is placed between the bend
sheet & square tube as shown in the fig..