Formwork
Push Pull Prop
Adjustable push-pull props and post shores engineered for plumb alignment and lateral wind/concrete pressure bracing of precast walls, vertical formwork panels, retaining shutters and column boxes.
Key Highlights
- Dual-action push and pull adjustment for rapid vertical alignment
- Heavy duty 60 mm OD outer tube × 48 mm inner tube
- Twin swivel base plates for secure anchoring to slab and shutter
- Equipped with forged nuts, captive G-hook and high-tensile pin
- Available in Hot Dip Galvanized, Powder Coated, Electro Zinc or Painted finishes
Precision Alignment for Vertical Formwork
Push-Pull Props (also known as plumbing struts or post shores) provide rigid diagonal bracing for wall and column formwork shutters, precast concrete panels and perimeter retaining structures. Operating in both tension and compression, a single worker can micro-adjust the shutter to precise vertical tolerance using the heavy-duty threaded collar.
Swiveling base footplates at each end allow seamless positioning at any angle relative to floor slabs, soldier beams and wall walers.
Key Technical Advantages
- Dual Load Action — Certified for both tensile (pull) and compressive (push) structural loads.
- Swivel Shoring Double Base — Self-aligning cast plates adapt to slopes and varying angles.
- Self-Cleaning Thread Collar — Coarse ACME pitch prevents jamming from wet mortar and dust.
- Corrosion Resisting Finishes — Hot-dip galvanizing, electro-galvanizing or industrial powder coating.
SF-1814 Prop Push Pull — Post Shore Technical Data
| Model Code | Pipe Outer Dia (OD) | Pipe Inner Dia (ID) | Closed End (m) | Open End (m) | Extended Reach (m) |
|---|---|---|---|---|---|
| SF-1814 | 60 mm × 3.2 mm wall | 48 mm × 3.2 mm wall | 2.500 | 4.000 | Up to 27.900 |
FS-Prop Nut Dimensions & Weights
| Code | S (mm) | T (mm) | L (mm) | With Pin & Wire (kg) | Without Pin (kg) |
|---|---|---|---|---|---|
| MS-1513-A | 14.0 | 3.6 | 200 | 1.380 | 1.300 |
| MS-1513-B | 16.0 | 3.3 | 230 | 1.415 | 1.335 |
| MS-1513-C | 18.0 | 3.6 | 250 | 1.485 | 1.405 |
Forged Pins (G-Hook)
| Code | Rod Dia (mm) | Weight (kg) | Material |
|---|---|---|---|
| MS-1814-05 | 12 | 0.320 | High-tensile forged steel |
| MS-1815-05 | 14 | 0.440 | High-tensile forged steel |
Accessories, Cup Nuts & Base Plates
Cup Nuts
| Code | Description | Material |
|---|---|---|
| MS-1728 (Pipe) | Cup Nut Pipe Type | Welded steel with winged ears |
| MS-1728 (Casted) | Cup Nut Casted | Heavy ductile casting with dual wings |
Base Components
| Part | Description | Fixing |
|---|---|---|
| FS-Double P/P Base | Double Push-Pull Prop Base | Floor slab anchoring with twin gusset plates |
| Swivel Shoring Base | Double Swivel Shoring Base | Multi-angle articulation for column & wall formwork |
* Finish Options: Hot Dip Galvanized, Powder Coating, Electro Zinc, Painted. Complete catalog available for download.
